Product Description

Inactive Exhaust / Active Exhaust delete for Chargers, Challengers and  300’s from 2015 to present

If you want to remove the active exhaust valves on your Dodge or Chrysler vehicle, you need a valve simulator to prevent the Check-Engine light and diagnostic trouble codes.

Here is the simplest, fully electronic solution! Other options on the market are purely mechanical; require re-using the valves and mounting them to a dummy plate.

Installation:

1: Crawl under vehicle and unplug both active exhaust valves.

2: Plug in the Inactive Exhaust modules.  Secure in place with a zip-tie.

3: That’s it!  You can leave the valves in place if you have a stock system and just want the valves open all the time.  Or you can remove them completely – even sell them!

Great for those that:

• just want the valves open full-time

• want to remove or disable “noisy valves” as it is common for them to rattle

• have faulty valves and don’t want the expense of replacing them

• installing aftermarket exhaust and are completely removing the valves

Installation:

This kit contains two parts – one is the inactive exhaust module, with an automotive-grade microprocessor that communicates with the vehicle to make it think that the valves are installed and functioning properly.  The other part is a dummy waterproof connector to keep the second valve’s plug from corrosion.

Works on all systems used in Chargers, Challengers and  300’s from 2015 to present.

Proudly made in the USA!