2020+ FORD SUPER DUTY F250, F350, F450 OEM-STYLE BED LIGHTING KIT

Want to add OEM-Style Bed Lighting to your Super Duty? The Starkey Bed Lighting Kit adds a premium OEM-Style cargo box lighting system to your 2020+ Super Duty in minutes! This system gives you the quality that is normally only found from the factory, while providing an easy to install system. Our kit is completely Plug-N-Play for many trucks – please be sure to determine if your truck is pre-wired before ordering by reading instructions below!

Features and Benefits:

LED lamps come ready for a plug and play installation. Our LED lamps are IP67 rated making them completely waterproof against high pressure water spray. Their UV treated Polycarbonate lens make them rugged and dependable. Lamps illuminate when you open the door or unlock the doors with your Key Fob, and fade-to-off automatically when the truck is started or doors are locked. They can also be activated by pressing the cargo lamp button located on the headlight switch.
Included is a Plug-N-Play adapter that allows you to seamlessly connect your LED lights to the factory wiring harness. Please see below for instructions on how to determine if your truck is pre-wired!*
LED’s are a White 6000k color temperature.
LED lamps, wiring and a complete instruction manual are all included. This kit was specifically engineered to fit the 2020+ Ford Super Duty.
Unlike the OEM Ford Kit, no trips to the dealership for BCM re-programming are necessary!

Fitment:

2020-2022 Ford F250, F350, F450

What’s Included:

2 – LED Lamps
Wiring Extensions for lamps
Plug-n-Play T-Adapter Harness
Detailed installation manual / video
5 Year Limited Warranty

Installation:

Installation difficulty = Very Low
Installation time = 15 minutes
Tools required = Flathead screw driver

*Your truck must be pre-wired for the T-Adapter to provide power to your Bed Lighting. To determine if your truck is pre-wired, check the C4003 inline connector shown in our instruction manual and YouTube installation video. The following wire should be present:

2020-2022 = Pin #7 (White with Brown Stripe)

If this wire is not present, you will also need Starkey #4572 Power Extension Wiring