Autostop Eliminator Diagnostic Port Type (OBD) for 2013 - 2019 Lincoln MKZ

The Autostop Eliminator is an intelligent device that plugs into the back of your vehicle's auto stop-start switch assembly. It restores your preference for auto start-stop automatically which eliminates the need to press the button after each ignition cycle.

Forget about the hacks. This is a real solution!

Easy 100% plug-and-play installation
Maintains auto start-stop button functionality
No parasitic battery drain
No moving parts or internal battery

Diagnostic Port Type

The diagnostic port type simply plugs into the On-Board Diagnostics (OBD) port under the dash in the driver's side footwell. While plugged in, the device will work to ensure when you turn auto start/stop off, it stays off.

The device has an LED light to indicate when it's awake and working. Some may prefer the LED to remain OFF so this preference is configurable. To turn the LED light OFF, press and hold the auto start/stop button on the vehicle until the LED light on the device blinks (~5 seconds). Repeat the procedure to turn the LED back ON. After completing this procedure, be sure to check the state of auto start/stop using the OFF indicator on the auto start/stop switch. Assuming your preference is OFF, you may need to press the auto start/stop button briefly once more.

The device can be plugged or unplugged at any time. However, since it does not make any changes to the vehicle, the device must stay plugged in for your auto start/stop preference to be automatically restored.

FITMENT:

2013 - 2019 Lincoln MKZ

Auto Stop Start Eliminator OBD for 2013 - 2019 Lincoln MKZ