Auto Stop Start Eliminator for 2025 Subaru Forester

FITMENT:

2025 Subaru Forester

Please read carefully before selecting the type.

Non-Wilderness Trims - Requires the AE051 which installs overhead into the back of the stereo camera. This is the only option that will work for non-wilderness trims.

Wilderness Trim - The choice is yours between the AE038 or the AE022. The only difference is the installation location. The AE038 installs overhead into the back of the stereo camera. The AE022 installs under the left seat into the Reverse Automatic Braking (RAB) module.

Forget about the hacks. This is a real solution!

Easy 100% plug-and-play installation into the diagnostic port
Maintains start-stop button functionality
No faults or codes
60-Day money-back guarantee

Unlike the other hacks, our solution doesn't make any changes to the vehicle programming. To revert to stock behavior, simply unplug the device.

The device can be plugged or unplugged at any time. However, since it does not make any changes to the vehicle, the device must stay plugged in for your auto start/stop preference to be automatically restored.

INSTALLATION:

Below you'll find two videos, one for the AE022 and one for the AE038/AE051.

The AE022 device for Subaru Forester vehicles with RAB simply plugs into the module under the driver's seat. Watch the video below to see the installation process.

The AE038 and AE051 device for Subaru Forester vehicles installs into the stereo camera inside the overhead console. Watch the video below to see the installation process

Pay careful attention to exactly where the device is installed. Customers frequently try to install into the overhead console connectors instead of the stereo camera connector. As you might imagine, this doesn't work.