Product Description
Auto Start Stop Eliminator for 2016 - 2017 Jeep Grand Cherokee
Forget about the hacks. This is a real solution!
- Easy 100% plug-and-play installation into the diagnostic port
- Maintains start-stop button functionality
- No faults or codes
- 60-Day money-back guarantee
Unlike the other hacks, our solution doesn't make any changes to the vehicle programming. To revert to stock behavior, simply unplug the device.
This intelligent device restores your preferences for the auto start-stop automatically which eliminates the need to press the button after each ignition cycle. Eliminate the need to disable the auto start-stop feature on your Jeep Grand Cherokee once and for all.
The device simply plugs into the port below the dash in the driver's footwell area. While plugged in, the device will work to ensure when you turn auto start/stop off, it stays off.
The device has an LED light that can be turned ON to indicate when it's awake and working. To toggle the LED light ON/OFF, press and hold the auto start/stop button on the vehicle until the LED light on the device blinks (~5 seconds). After completing this procedure, be sure to check the state of auto start/stop using the OFF indicator on the auto start/stop switch. Assuming your preference is OFF, you may need to press the auto start/stop button briefly once more.
The device can be plugged or unplugged at any time. However, since it does not make any changes to the vehicle, the device must stay plugged in for your auto start/stop preference to be automatically restored.
Installation:
The device simply plugs into the port below the dash in the driver's footwell area. While plugged in, the device will work to ensure when you turn auto start/stop off, it stays off.
The device has an LED light that can be turned ON to indicate when it's awake and working. To toggle the LED light ON/OFF, press and hold the auto start/stop button on the vehicle until the LED light on the device blinks (~5 seconds). After completing this procedure, be sure to check the state of auto start/stop using the OFF indicator on the auto start/stop switch. Assuming your preference is OFF, you may need to press the auto start/stop button briefly once more.
The device can be plugged or unplugged at any time. However, since it does not make any changes to the vehicle, the device must stay plugged in for your auto start/stop preference to be automatically restored.
