null

FORD F150 OEM-STYLE BED LIGHTING KIT (2015-2020)

$139.99
(No reviews yet) Write a Review
SKU:
4580
Condition:
New

Product Description

FORD F150 OEM-STYLE BED LIGHTING KIT (2015-2020)

 DESCRIPTION

Want to add OEM-Style Bed Lighting to your F-150? The Starkey Bed Lighting Kit adds a premium OEM-Style cargo box lighting system to your 2015+ F-150 in minutes! This system gives you the quality that is normally only found from the factory, while providing an easy to install system. Our kit is completely Plug-N-Play for some trucks – please be sure to determine if your truck is pre-wired before ordering by reading instructions below!

2021+ F150 System Available – See SKU# 4781

Features and Benefits:

  • LED lamps come ready for a plug and play installation. Our LED lamps are IP67 rated making them completely waterproof against high pressure water spray. Their UV treated Polycarbonate lens make them rugged and dependable. Lamps illuminate when you open the door or unlock the doors with your Key Fob, and fade-to-off automatically when the truck is started or doors are locked.
  • Included is a Plug-N-Play adapter that allows you to seamlessly connect your LED lights to the factory wiring harness. All trucks equipped with the Trailer Assist Lamp, as well as some trucks with a factory-installed tow package are completely Plug and Play. Please see below for instructions on how to determine if your truck is pre-wired!*
  • LED’s are a White 6000k color temperature. White perfectly matches the factory trailer assist lamp.
  • LED lamps, wiring and a complete instruction manual are all included. This kit was specifically engineered to fit the 2015+ F-150!
  • Unlike the OEM Ford Kit, no trips to the dealership for BCM re-programming are necessary!

Fitment:

  • 2015-2020 Ford F-150**

What’s Included:

  • 2 – LED Lamps
  • Wiring Extensions for lamps
  • Plug-n-Play C431 Y-Adapter Harness
  • Detailed installation manual / video
  • 5 Year Limited Warranty

Installation:

  • Installation difficulty = Very Easy
  • Installation time = 15 minutes
  • Tools required = Flathead screw driver

*Your truck must be pre-wired for the Y-Adapter to provide power to your Bed Lighting. To determine if your truck is pre-wired, check the C431 inline connector shown in our instruction manual and YouTube installation video. On at least one of the plugs, the following wires should be present:

2015-2017 = Pin #6 (Black with Yellow Stripe) and Pin #7 (Purple) – Please note, there is a Brown wire with Purple stripe that looks similar.

2018-2020 = Pin #6 (Black with Yellow Stripe) and Pin #7 (White with Green Stripe) – Please note, there are TWO White with Green wires one side. You must have BOTH.

If they are not, you will also need Starkey #4572 Power Extension Wiring

**In rare instances, some 2015 & 2020 trucks may have a black connector in place of the normal connector shown. This product will work with minor modification – see instruction manual for details.