A swirl pot allows air to escape from the cooling system during normal operation. If your radiator is not the highest point in your cooling system, you need a swirl pot.
This aluminum swirl pot gets installed by running the outlet (discharge) from the engine block into the upper (side) inlet on the pot. Coolant swirls around the inside of the pot as it flows to the bottom, allowing air bubbles to break up and escape via the upper vent tube. Coolant is drawn out the bottom outlet, through the radiator, and back to the water pump suction side. The vent can be connected to the radiator air bleed or to a catch tank.
Aluminium Products have always been a core part of obp Motorsport’s product line up. Over the years they have become world renowned for high quality craftsmanship and reliability. Each obp Motorsport Aluminium Product is handmade in the UK and goes through rigorous quality checks before it gets delivered to your door. Product Information: Dimensions: (H) 7.67", (Dia) 2.55" Inlet: Swaged 1 1/4" (32mm) Push On Outlet: Swaged 1 1/4" (32mm) Push On Extras: Standard Radiator Neck (No Cap) with 0.39" (10mm) Push On Overflow
